View DM-301_7341155.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

thermocouple & resistance thermometer sensors & probes a wide range of configurations for industrial and laboratory applications www.labfacility.co.uk
2 thermocouple & resistance thermometer sensors & probes contents mineral insulated, flexible sheath thermocouples . . . . 3 welded tip, fine wire thermocouples . . . . . . . . . . . . . . . . . 5 thermocouples for specific applications including surface air & plastics machinery sensors . . . . . . . . . . . . . 6 hand held thermocouple probes . . . . . . . . . . . . . . . . . . . . . . 7 furnace thermocouples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 mineral insulated, flexible sheath platinum resistance thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 fabricated, rigid sheath platinum resistance thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 platinum resistance thermometers for specific applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 hand held platinum resistance thermometers . . . . . . 10 platinum resistance thermometer elements (sensing resistors) . . . . . . . . . . . . . . . . . . . . . . . . . . 10 custom sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 probe certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 installation fittings for temperature sensors . . . . . . . . . 13 head mounting temperature transmitters . . . . . . . . . . . 13 other labfacility products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 choosing the sensor type: thermocouples are less expensive than prt sensors, more versatile, less accurate, more rugged, more sensitive, have a wider operating range, are tip sensitive and can be smaller. extension cabling is more expensive. various calibrations are available for different applications. prt assemblies are much more accurate and stable, permit greater resolution of measurement but over a more limited range, are stem sensitive, larger and more expensive. extension cabling is inexpensive copper wire. remember the type of sensor chosen must suit the associated instrumentation. thermocouple & platinum resistance thermometers in a wide range of configurations & dimensions ranges from -200? to 1700? mineral insulated, flexible and fabricated, rigid probes fine wire thermocouples hand held probes plastics, surface & air sensors furnace thermocouples calibrated sensors general purpose and application specific designs installation fittings head mounting temperature transmitters pt100 & pt1000 detectors iso 9001 registered full compliance with iec specifications thermocouple calibration types j,k,t,n,e,r & s available + + + + + + + + + + + + + + + + + + + + + + + + + + colour codes thermocouple connectors, extension and compensating wires and cables insulation colour codes extension & compensating leads cable code nickel chromium/constantan ex e (nickel chromium/copper nickel, chromel/constantan, t1/advance, nicr/constantan) j iron*/constantan jx (iron/copper nickel, fe/konst iron/advance, fe/constantan i/c) k nickel chromium/nickel kx aluminium* (nc/na, chromel/alumel, c/a, t1/t2, nicr/ni, nicr/nial) n nicrosil/nisil nx nc t copper/constantan tx (copper/copper nickel, cu/con, copper/advance) vx copper/constantan kcb (low nickel) (cu/constantan) compensating for k (cu/constantan) u copper/copper nickel rca compensating for platinum 10% or 13% rhodium/platinum (codes s & r respectively) (copper/cupronic sca cu/cuni, copper/no. 11 alloy) * magnetic, ( ) alternative & trade name for thermocouple connectors body colours are similar to outer sheath colours for thermocouple connectors body colours are similar to outer sheath colours iec584-3: 1989 bs4937. part 30. 1993 the british standard colour code for thermocouple cables, bs1843: 1952 is superseded by bs4937 part 30 1993 (=iec 584-3 1989) additional identification as to whether a thermocouple cable type is extension or compensating is indicated in the example which follows; however, please note that a letter a or b after the c for compensating refers to the cable temperature range in accordance with the table of tolerance values set out with this standard. k x 1 = k extension class 1 k ca 2 = k compensation class 2 www.labfacility.co.uk type j type k type t type n type e type r type s all technical information published in this brochure is for guidance and not necessarily definitive. all thermocouple items comply with iec 584 colour codes, cable and thermoelement tolerances unless otherwise stated. all platinum resistance thermometer items comply with iec 751 tolerance and termination colour codes. all dimensions stated are nominal. product availability & specifications may be subject to change. e & oe to receive our regular email newsletter, please register your details on our website former standard type conductors +/- british american german bs1843: 1952 ansi/mc 96.1 din 43713 / 43714
mineral insulated thermocouples with tails. style md mineral insulated thermocouple type k choice of stainless steel 310 or inconel 600 sheath m8 x 1.0mm threaded pot (200 c) sensor temperature range -100 to 1100 c tails 100mm, pfa insulated twin twisted, 7/0.2mm mineral insulated thermocouples with extension lead & plain pot seal. style ma mineral insulated thermocouple type j or k plain, stainless steel pot (200 c) stainless steel sheath, type k 310, type j 321 type k -100 to 1100 c sensor range type j -100 to 760 c sensor range 2m pfa insulated lead, 7/0.2mm flat pair mineral insulated thermocouples with extension lead & threaded pot seal. style ma mineral insulated thermocouple type k or n type n nicrosil sheath, type k stainless steel sheath 310 m8 x 1.0mm threaded pot seal (200 c) type k -100 to 1100 c sensor range type n -230 to 1300 c sensor range 2m pfa insulated lead, 7/0.2mm flat pair 3 thermocouples order codes type k stainless steel sheath probe probe code dia length (mm) (mm) 0.5 150 md-isk-s05-150-p5 0.5 250 md-isk-s05-250-p5 0.5 500 md-isk-s05-500-p5 0.5 1000 md-isk-s05-1000-p5 1.0 150 md-isk-s10-150-p5 1.0 250 md-isk-s10-250-p5 1.0 500 md-isk-s10-500-p5 1.0 1000 md-isk-s10-1000-p5 1.5 150 md-isk-s15-150-p5 1.5 250 md-isk-s15-250-p5 1.5 500 md-isk-s15-500-p5 1.5 1000 md-isk-s15-1000-p5 3.0 150 md-isk-s30-150-p5 3.0 250 md-isk-s30-250-p5 3.0 500 md-isk-s30-500-p5 3.0 1000 md-isk-s30-1000-p5 3.0 2000 md-isk-s30-2000-p5 6.0 250 md-isk-s60-250-p5 6.0 500 md-isk-s60-500-p5 6.0 1000 md-isk-s60-1000-p5 6.0 2000 md-isk-s60-2000-p5 order codes inconel sheath probe probe code dia length (mm) (mm) 1.0 500 md-isk-i10-500-p5 1.0 1000 md-isk-i10-1000-p5 1.5 500 md-isk-i15-500-p5 1.5 1000 md-isk-i15-1000-p5 3.0 500 md-isk-i30-500-p5 3.0 1000 md-isk-i30-1000-p5 3.0 2000 md-isk-i30-2000-p5 6.0 1000 md-isk-i60-1000-p5 6.0 2000 md-isk-i60-2000-p5 order codes type k probe probe code dia length (mm) (mm) 1.0 300 ma-isk-s10-300-p5-2.0-c2-t 1.5 300 ma-isk-s15-300-p5-2.0-c2-t 3.0 300 ma-isk-s30-300-p5-2.0-c2-t 6.0 300 ma-isk-s60-300-p5-2.0-c2-t 1.0 500 ma-isk-s10-500-p5-2.0-c2-t 1.5 500 ma-isk-s15-500-p5-2.0-c2-t 3.0 500 ma-isk-s30-500-p5-2.0-c2-t 6.0 500 ma-isk-s60-500-p5-2.0-c2-t order codes type n probe probe code dia length (mm) (mm) 1.0 300 ma-isn-n10-300-p5-2.0-c2-t 1.5 300 ma-isn-n15-300-p5-2.0-c2-t 3.0 300 ma-isn-n30-300-p5-2.0-c2-t 6.0 300 ma-isn-n60-300-p5-2.0-c2-t 1.0 500 ma-isn-n10-500-p5-2.0-c2-t 1.5 500 ma-isn-n15-500-p5-2.0-c2-t 3.0 500 ma-isn-n30-500-p5-2.0-c2-t 6.0 500 ma-isn-n60-500-p5-2.0-c2-t www.labfacility.co.uk type j type k type t type n type e type r type s mineral insulated thermocouples mineral insulated thermocouples are for use up to 1300 c depending on the configuration. they are rugged, steel sheathed probes with flexible sheaths allowing bending or forming. they offer long life (depending on use) and can be used in high pressure and vibration applications. stainless steel sheaths provide optimum flexibility inconel 600 offers better corrosion resistance in many applications. alternative cable types available. alternatives made to order details on request order codes type k probe probe code dia length (mm) (mm) 0.5 150 ma-isk-s05-150-p1-2.0-c2-t 0.5 250 ma-isk-s05-250-p1-2.0-c2-t 1.0 150 ma-isk-s10-150-p1-2.0-c2-t 1.0 250 ma-isk-s10-250-p1-2.0-c2-t 1.5 150 ma-isk-s15-150-p1-2.0-c2-t 1.5 250 ma-isk-s15-250-p1-2.0-c2-t 3.0 150 ma-isk-s30-150-p1-2.0-c2-t 3.0 250 ma-isk-s30-250-p1-2.0-c2-t 6.0 150 ma-isk-s60-150-p1-2.0-c2-t 6.0 250 ma-isk-s60-250-p1-2.0-c2-t order codes type j probe probe code dia length (mm) (mm) 1.5 150 ma-isj-s15-150-p1-2.0-c2-t 1.5 250 ma-isj-s15-250-p1-2.0-c2-t 3.0 150 ma-isj-s30-150-p1-2.0-c2-t 3.0 250 ma-isj-s30-250-p1-2.0-c2-t 6.0 150 ma-isj-s60-150-p1-2.0-c2-t 6.0 250 ma-isj-s60-250-p1-2.0-c2-t
duplex mineral insulated thermocouples with extension lead & plain pot seal. style ma 2 independent thermocouples in single sheath mineral insulated thermocouples type k stainless steel sheath 310 plain, stainless steel pot (200 c) sensor temperature range -100 to 1100 c 2m pfa insulated lead, 4 core 7/0.2mm mineral insulated thermocouples with standard plug. style mb mineral insulated thermocouples, type k quick, simple connection for easy installation standard plug termination (220 c) stainless steel sheath 310 sensor temperature range -100 to 1100 c mineral insulated thermocouples with miniature plug. style mb mineral insulated thermocouples, type k quick, simple connection for easy installation miniature plug termination (220 c) stainless steel sheath 310 sensor temperature range -100 to 1100 c industrial mineral insulated thermocouple with terminal head, extension & replaceable insert. style mc/me mineral insulated thermocouple, type k aluminium ip67 terminal head, m20 x 1.5mm cable entry sensor temperature range -100 c to 800 c stainless steel sheath & extension extension 12.5mm diameter x 75mm 1 2 bsp (p) process connection replaceable spring loaded insert industrial mineral insulated thermocouple with terminal head. style mc mineral insulated thermocouples, type j or k stainless steel sheath, type k 310, type j 321, 6mm diameter aluminium ip67 terminal head, m20 x 1.5mm cable entry sensor temperature range -100 c to 1100 c (k) -100 c to 760 c (j) optional transmitter-in-head, see page 14 thermowells & fittings available, see page 13 industrial mineral insulated thermocouple with terminal head & process connection. style mc mineral insulated thermocouple, type k aluminium ip67 terminal head, m20 x 1.5mm cable entry 1 2 bsp (p) process connection, stainless steel stainless steel sheath 310, 6mm diameter sensor temperature range -100 c to 1100 c optional transmitter-in-head, see page 14 thermowells available details on request 4 thermocouples www.labfacility.co.uk type j type k type t type n type e type r type s order codes type k dia length code (mm) (mm) 3.0 150 ma-idk-s30-150-p1-2.0-c2-t 3.0 250 ma-idk-s30-250-p1-2.0-c2-t 6.0 150 ma-idk-s60-150-p1-2.0-c2-t 6.0 250 ma-idk-s60-250-p1-2.0-c2-t order codes type k dia length code (mm) (mm) 1.5 150 mb-isk-s15-150-sp 1.5 250 mb-isk-s15-250-sp 3.0 150 mb-isk-s30-150-sp 3.0 250 mb-isk-s30-250-sp 6.0 150 mb-isk-s60-150-sp 6.0 250 mb-isk-s60-250-sp order codes type k dia length code (mm) (mm) 0.5 150 mb-isk-s05-150-mp 0.5 250 mb-isk-s05-250-mp 1.0 150 mb-isk-s10-150-mp 1.0 250 mb-isk-s10-250-mp 1.5 150 mb-isk-s15-150-mp 1.5 250 mb-isk-s15-250-mp 3.0 150 mb-isk-s30-150-mp 3.0 250 mb-isk-s30-250-mp order codes type k complete assembly: probe length 150mm 010559td-a 250mm 010559td-b 500mm 010559td-c replacement inserts to suit: 150mm me-isk-s60-275-dpb 250mm me-isk-s60-375-dpb 500mm me-isk-s60-625-dpb order codes type k 100mm probe mc-isk-s60-100-kne type k 200mm probe mc-isk-s60-200-kne type k 400mm probe mc-isk-s60-400-kne type k 600mm probe mc-isk-s60-600-kne type j 200mm probe mc-isj-s60-200-kne type j 400mm probe mc-isj-s60-400-kne type j 600mm probe mc-isj-s60-600-kne order codes probe length 150mm mc-isk-s60-150-kne-pr1 250mm mc-isk-s60-250-kne-pr1 500mm mc-isk-s60-500-kne-pr1 alternatives made to order details on request
welded tip thermocouples, glassfibre insulated. style z3 fast response, exposed junction thermocouple types j,k & t glassfibre insulated wires, silicone varnished flat pair, 1/0.315mm, 2m long rated -60 c to 350 c ideal for test & development applications fine wire welded tip thermocouples, pfa insulated. style z2 fast response, exposed junction thermocouple type k&t pfa insulated wires, 1m singles 1/0.08mm, class 1 rated -75 c to 250 c iec colours supplied (ansi shown) ideal for test & development applications welded tip thermocouples, pfa insulated. style z2 fast response, exposed junction thermocouple types j,k & t pfa insulated wires twin twist 1/0.2mm, class 1, 2m long rated -75 c to 250 c ideal for test & development applications very fine welded tip thermocouples, bare wire. style z1 optimum sensitivity, very responsive exposed junction thermocouple type k bare wires 1/0.0254mm x 200mm ideal for minimally invasive temperature sensing welded tip thermocouples with miniature plugs & choice of lead. style z2 & z3 choice of fitted (220 c) or moulded-on miniature plug (100 c) fast response, exposed junction thermocouple types j,k,t & n choice of pfa insulated wires 2m, twin twist 1/0.2mm, class 1 or glassfibre, flat pair 1/0.315mm rated -75 c to 250 c, pfa (-60 c to 350 c glassfibre) ideal for test & development applications cable tidy thermocouple with fitted miniature plug a complete, precision fine wire, high sensitivity thermocouple with a fitted miniature connector quick and easy integral storage of the thermocouple type k & t thermocouples, 1 & 2m lengths class 1 wire for high accuracy pfa insulated wire, 0.2 & 0.315mm conductors rated 220 c continuous ideal & convenient for scientific and industrial test & measurement details on application 5 www.labfacility.co.uk type j type k type t type n type e type r type s thermocouples welded tip fine wire thermocouples order codes k z3-k-f/g-1/0.315-2.0-t t z3-t-f/g-1/0.315-2.0-t j z3-j-f/g-1/0.315-2.0-t for packs of five, add x5 to code other thermocouple types available, details on request. order codes type k z1-k-1/0.0254-0.2-t for packs of five add x5 to code other thermocouple types available details on request. order codes fitted plug pfa: type j z2-j-pfa-tt-1/0.2-2.0-mp type k z2-k-pfa-tt-1/0.2-2.0-mp type t z2-t-pfa-tt-1/0.2-2.0-mp fitted plug glassfibre: type j z3-j-f/g-1/0.315-2.0-mp type k z3-k-f/g-1/0.315-2.0-mp type n z3-n-f/g-1/0.315-2.0-mp ?oulded-on?plug pfa type j z2-j-pfa-tt-1/0.2-2.0-mmp type k z2-k-pfa-tt-1/0.2-2.0-mmp type t z2-t-pfa-tt-1/0.2-2.0-mmp for packs of five, add x5 to code other thermocouple types available, details on request order codes k z2-k-pfa-tt-1/0.2-2.0-t t z2-t-pfa-tt-1/0.2-2.0-t j z2-j-pfa-tt-1/0.2-2.0-t for packs of five, add x5 to code other thermocouple types available, details on request. order codes k z2-k-pfa-tt-1/0.08-1.0-t t z2-t-pfa-tt-1/0.08-1.0-t for packs of five, add x5 to code other thermocouple types available, details on request. alternatives made to order details on request
copper disc, fine wire thermocouple, pfa insulated copper disc 6.35mm diameter x 0.3mm thick thermocouples type j & k pfa insulated wires 2m, twin twist 1/0.2mm, class 1 rated 0 c to 200 c adhesive kapton strip 13x18mm supplied x 5 thermopads self-adhesive pads in ptfe glass cloth for locating welded tip thermocouples -50 c to 200 c packs of 20 pads pad 13x18mm thermocouples for specific applications magnetic strip thermocouple. style fms type k thermocouple in a flexible magnetic strip for use on ferro-magnetic surfaces temperature range -50 to 120 c 2m pfa twisted pair insulated lead, 1/0.315mm strip 50 x 25 x 1mm button magnet thermocouple. style bms type k thermocouple in a powerful magnet grounded measuring junction temperature range 0 c to 250 c 2m pfa twisted pair insulated lead 7/0.2mm magnet 12.5mm diameter x 10mm plastics & general use adjustable bayonet fitting thermocouple. style fs a type j or k thermocouple with adjustable insertion depth 4.5mm or 6.0mm diameter tip 170mm spring with adjustable fixing cap grounded tip for fast response rated 350 c 2m glassfibre, stainless steel braided lead, 7/0.2mm male adaptor available 1 8 bsp thread, see page 13 washer thermocouple. style fw a type j or k thermocouple housed in a washer eyelet grounded tip for fast response rated 350 c washer with 6mm clearance hole 2m glassfibre steel braided extension lead, 7/0.2mm melt thermocouple. style fm type j melt bolt sensors for plastics machinery robust construction to withstand high pressure and temperatures rated 450 c (sensor), 220 c (connector). insulated junction suits wide range of extruders and moulders 310 stainless steel: unf 20 thread. 76 or 152mm bolt length sheath; immersion depth 5mm, diameter 3mm 6 www.labfacility.co.uk type j type k type t type n type e type r type s thermocouples order codes k fms-k-pfa-tt-1/0.315-2.0-mp order codes bms-k-pfa-tt-7/0.2-2-mp order codes style fs type & size type k 6mm fs-gsk-6.0-2.0-c4-t type j 6mm fs-gsj-6.0-2.0-c4-t type k 4.5mm fs-gsk-4.5-2.0-c4-t type j 4.5mm fs-gsj-4.5-2.0-c4-t male adaptor ca-400 order codes type j fw-j-2.0-c4-t k fw-k-2.0-c4-t order codes type & length j, 76mm fm-j-u-76-5 j, 152mm fm-j-u-152-5 order codes k disc-k-pfa-tt-1/0.2-2.0-t j disc-j-pfa-tt-1/0.2-2.0-t for packs of five add x 5 to code other thermocouple types available, details on request order codes thermopads pe-021 alternatives made to order details on request
nozzle thermocouple. style fn a type j or k thermocouple housed in a threaded bolt grounded tip for fast response adjustable insertion via free running nut m6 x 1mm threaded stainless steel bolt rated 350 c 2m glassfibre stainless steel braided extension lead, 7/0.2mm leaf thermocouple. style fl a type j or k sensor mounted on a stainless steel shim grounded tip for fast response rated 350 c 2m glassfibre stainless steel braided extension cable, 7/0.2mm stainless steel shim 25mm long x 13mm wide patch surface thermocouple. style srs type k thermocouple in a moulded silicone rubber patch dimensions 40 x 13mm self-adhesive, aluminium foil backing 2m pfa twin twisted lead 1/0.2mm resistant to many oils and chemicals pipe surface thermocouple. style fp fits pipe diameters 13mm to 55mm (4 sizes) a type k stainless steel pipe clamp sensor with adjustable diameter grounded tip for fast response rated 350 c 2m glassfibre stainless steel braided extension lead, 7/0.2mm heavy duty rigid probe. style fa type j or k rugged, immersion thermocouple probe 4.5mm diameter x 150mm long 2m glassfibre, stainless steel braided lead, 7/0.2mm sensor temperature range -60 c to 350 c grounded junction for fast response hand held thermocouple probes a range of hand held probes provides alternative handle and sheath configurations for a wide variety of applications. a choice of handle designs coiled lead or straight lead options miniature plug termination penetration, air & surface tip designs use with any digital thermometer furnace thermocouples labfacility offers a comprehensive range of base and rare metal thermocouples for high temperature applications including furnaces. standard configurations or custom made types k,n,r,s & b temperature ratings up to 1750 c wide range of sheath materials including stainless steel and alumina single and dual sheathed versions for optimum element protection details on application 7 www.labfacility.co.uk type j type k type t type n type e type r type s thermocouples order codes j fl-j-2.0-c4--t k fl-k-2.0-c4-t order codes type k faa-gsk-4.5-150-2.0-c4-t j faa-gsj-4.5-150-2.0-c4-t order codes k srs-k-pfa-tt-1/0.2-2.0-t order codes type & size k, 13-20mm fp-k-13-2.0-c4-t k, 20-30mm fp-k-20-2.0-c4-t k, 30-40mm fp-k-30-2.0-c4-t k, 40-55mm fp-k-40-2.0-c4-t order codes j fn-j-m-2.0-c4-t k fn-k-m-2.0-c4-t alternatives made to order details on request
alternatives made to order mineral insulated pt100 probe with extension lead. style mira high temperature, rugged flexible pt100 probe pt100 class b, 4-wire connection sensor temperature rating -100 to 500 c 2m pfa insulated screened lead, 7/0.2mm, 4 core stainless steel sheath duplex mineral insulated pt100 probe with extension lead. style mira high temperature, rugged, flexible pt100 probe 2 independent pt100 sensors in single sheath 2 x pt100, class b, 3 wire connection sensor temperature range -100 to 500 c 2m ptfe insulated, screened lead, 6 core, 7/0.2mm stainless steel sheath 8 platinum resistance thermometers www.labfacility.co.uk mineral insulated, flexible sheath resistance thermometers mineral insulated resistance thermometers are for use up to 500 c depending on the configuration. they are rugged, steel sheathed probes with flexible sheaths allowing bending or forming. they offer long life (depending on use) are resistant to vibration and can be used in high pressure applications. alternative cable types available 4 wire thermometer can be connected as 4,3 or 2 wire; 3 wire can be connected as 3 or 2 wire fabricated, rigid sheath resistance thermometers fabricated or general purpose resistance thermometers are for use up to 350 c. the rigid, steel probes and alternative sensor configurations suit many applications. alternative cable types available. 4 wire thermometer can be connected as 4,3 or 2 wire; 3 wire can be connected as 3 or 2 wire order codes dia length code (mm) (mm) 3.0 150 miraa-s4b-30-150-pi-2.0-c2-t 3.0 250 miraa-s4b-30-250-pi-2.0-c2-t 6.0 150 miraa-s4b-60-150-pi-2.0-c2-t 6.0 250 miraa-s4b-60-250-pi-2.0-c2-t pt100 probe with extension lead. style ra accurate, general purpose temperature sensor pt100, class b, 4 wire connection stainless steel probe sensor temperature range -50 to 250 c 2m pfa insulated screened lead, 7/0.2mm for 6.0mm probe 2m pfa insulated screened lead, 7/0.1mm for 3.0mm probe pt100 general purpose temperature sensor. style ra a heavy duty industrial probe with a tough, silicone rubber insulated lead pt100, class b, 4 wire stainless steel rigid sheath 6mm diameter, 50mm and 100mm lengths 2m, 4 core 7/0.2mm silicone rubber insulated lead sensor temperature range -50 c to 200 c pt100 precision probes. style ra high accuracy, close tolerance pt100 sensors suitable as reference probes pt100 1/5din tolerance element, 4 wire connection accuracy better than 0.6 c at 0 c 2m ptfe insulated, screened lead, 7/0.2mm sensor temperature range -50 to 250 c alternative 450 c version stainless steel sheath order codes dia length code (mm) (mm) 3.0 100 raa-s4b-30-100-np-2.0-c2-t 6.0 100 raa-s4b-60-100-np-2.0-c2-t 3.0 150 raa-s4b-30-150-np-2.0-c2-t 6.0 150 raa-s4b-60-150-np-2.0-c2-t 3.0 250 raa-s4b-30-250-np-2.0-c2-t order codes max temperature dia (mm) length (mm) code 250 c 6.0 250 l250 450 c 6.0 350 h450 order codes dia (mm) length (mm) code 6.0 50 010632td/a 6.0 100 010632td/b order codes dia length code (mm) (mm) 6.0 150 miraa-d3b-60-150-pi-2.0-c2-t 6.0 250 miraa-d3b-60-250-p1-2.0-c2-t
quick response thin film, general purpose pt100 probe. style ra stainless steel sheath housing a thin film pt100 in flat tip adjustable, fitted compression gland pt100, class b element, 2 wire connection probe 4mm diameter x 117mm sensor temperature range -50 to 250 c brass gland 1 8 bsp (p) 1m ptfe insulated, screened lead, 2 wire 7/0.2mm duplex pt100 probe with extension lead. style ra 2 independent pt100 sensors in single sheath pt100, class b, 2 x 3 wire sensor temperature range -50 c to 250 c 2m ptfe insulated screened lead, 6 core 7/0.2mm stainless steel sheath industrial pt100 sensor with terminal head. style rc high temperature, rugged probe with pt100 element pt100, class b, 4 wire connection stainless steel sheath, 6mm diameter aluminium ip67 terminal head, m20 x 1.5mm cable entry sensor temperature range -100 to 450 c optional transmitter-in-head, see page 14 thermowells & fittings available, see page 13 industrial, pt100 sensor with terminal head, extension & replaceable insert. style rc & re high temperature, rugged probe with pt100 element pt100, class b, 4 wire connection stainless steel sheath & extension extension 12.5mm diameter x 75mm aluminium ip67 terminal head, m20 x 1.5mm cable entry 1 2 bsp (p) process connection replaceable spring loaded insert sensor temperature range -100 c to 450 c industrial pt100 sensor with terminal head & process connection. style rc high temperature, rugged probe with pt100 element pt100, class b, 4 wire connection stainless steel sheath, 6mm diameter aluminium ip67 terminal head, m20 x 1.5mm cable entry 1 2 bsp(p) process connection, stainless steel sensor temperature range -100 c to 450 c optional transmitter-in-head, see page 14 thermowells & fittings available, see page 13 9 platinum resistance thermometers www.labfacility.co.uk order codes 3 wire connection available on request 010331td order codes dia length code (mm) (mm) 6.0 150 raa-d3b-60-150-pi-2.0-c2-t 6.0 250 raa-d3b-60-250-pi-2.0-c2-t order codes probe length code (mm) 100 rca-s4b-60-100-kne 150 rca-s4b-60-150-kne 200 rca-s4b-60-200-kne 400 rca-s4b-60-400-kne 600 rca-s4b-60-600-kne order codes pt100 complete assembly: probe length code (mm) 150 010556td/a 250 010556td/b 500 010556td/c replaceable inserts: probe length code (mm) 150mm re-s4b-s60-275-dpb 250mm re-s4b-s60-375-dpb 500mm re-s4b-s60-625-dpb order codes probe length code (mm) 100 rca-s4b-60-100-kne-pr1 150 rca-s4b-60-150-kne-pr1 250 rca-s4b-60-250-kne-pr1 500 rca-s4b-60-500-kne-pr1 details on request
external/cold store pt100 sensor. style rtp rugged, wall mounting pt100 assembly for heavy duty applications pt100, class b for 2,3 or 4 wire connection temperature range -50 c to 150 c weatherproof assembly to ip67, h80 x w74 x d54mm stainless steel perforated probe 12.5mm diameter x 75mm m20 cable gland 4-20ma transmitter option clean room pt100 sensor. style rtz moulded, wall mounting pt100 housing for accurate, indoor air temperature sensing moulded case h85 x w85 x d30mm surface or standard electrical conduit mounting pt100, class b for 2,3, or 4 wire connection temperature range 0 to 70 c patch, surface pt100. style rtf pt100 class b sensor in a moulded silicone rubber patch dimension l40mm, w13mm, thickness 5mm 4 wire connection self-adhesive, aluminium foil backing 2m ptfe insulated, twisted pair lead, 4 core, 7/0.2mm temperature range -50 to 150 c resistant to many oils & chemicals hand held pt100 probes a range of hand held probes provides alternative handle and sheath configurations details on application. 10 platinum resistance thermometers www.labfacility.co.uk resistance thermometers for specific applications pt100 & pt1000 elements to iec751, class a & b wirewound & thin film construction thin film elements are resistant to vibration & shock & provide better thermal sensitivity wirewound elements provide optimum performance in process applications when used in a protective sheath glass encapsulated options for hermetic sealing details on request extended lead options, 2 & 4 wire with ceramic sheath wide range of sizes range 200 to 800 c wirewound, -70 to 500 c thin film duplex versions (wirewound) thin film pt1000 elements thin film pt100 elements order code code pt100 assembly rtp-pt100 4-20ma transmitter version rtp-pt100-tx order code rtz-pt100 order code rtf4-2 order codes thin film elements pt1000 type code 2 x 10mm, class a dm-310 2 x 10mm class b dm-507 for packs of 5, add x5 to code order codes thin film elements pt100 type code 2 x 5mm, class b dm-503 2 x 10mm, class a dm-334 2 x 10mm, class b dm-333 2 x 2.3mm, class a dm-303 2 x 2.3mm, class b DM-301 for packs of 5, add x5 to code alternatives made to order details on request platinum resistance sensing elements
thin film elements pt100, class b thermometer inserts element housed in ceramic sheath 5mm dia x 35mm long thin film pt100 elements to bs1904 1984, class b leads 1/0.4mm dia nickel wire 7/0.2mm singles copper wire, ptfe insulated 2 and 4 wire configurations non sleeved or glassfibre sleeved for -50 c to 450 c ptfe insulated wires for -50 c to 250 c flat sheathed, thin film pt100 sheathed pt100 element in thin stainless steel body dimentions, length x 35mm width x 6mm height 2mm temperature range -50 c to 250 c 1m of ptfe insulated twin twist 7/0.2mm wirewound elements pt100 also available with extended leads wirewound elements, pt100 class b with extended leads leads 7/0.2mm copper wire, pfa sleeved duplex wirewound elements, pt100 2 x pt100 elements, single element shown. also available with extended leads 11 www.labfacility.co.uk platinum resistance thermometers order codes type code 450mm x 4 wire, 01-412-rt/a 1/0.4mm glass fibre 450mm x 4 wire, 01-412-rt/b 7/0.2mm ptfe 10mm x 2 wire, 01-412-rt/c 1/0.4mm bare 50mm x 2 wire, 01-412-rt/d 7/0.2mm ptfe order codes dimensions tolerance class code dia x length (mm) 2.8 x 25 b da-016 2.8 x 25 a da-017 2.8 x 25 1/3 da-018 2.8 x 25 1/5 da-019 2.8 x 25 1/10 da-020 1.5 x 25 b da-026 2.8 x 15 b da-041 2.8 x 15 a da-042 2.8 x 15 1/3 da-043 2.8 x 15 1/5 da-044 2.8 x 15 1/10 da-045 2.4 x 15 b da-046 1.6 x 15 b da-056 dimensions tolerance class code dia x length (mm) 1.5 x 15 b da-061 1.5 x 15 a da-062 1.5 x 15 1/3 da-063 1.5 x 15 1/5 da-064 1.5 x 15 1/10 da-065 1.5 x 8 b da-081 1.5 x 8 a da-082 1.5 x 8 1/3 da-083 1.5 x 8 1/10 da-085 2.3 x 25 b da-011 1.6 x 15 1/10 da-067 alternatives made to order details on request order codes 01-411-rt order codes type code 5mm dia x 35mm long x 2 wire 010011td 5mm dia x 35mm long x 4 wire 010010td order codes type code 1.5mm dia x 15mm class a db-151 1.5mm dia x 15mm class b db-150
12 custom sensors www.labfacility.co.uk labfacility is a specialist designer and manufacturer for custom specified temperature sensors. special assemblies can be supplied against a sample (existing) probe, a customer drawing or a written specification. special close tolerance, high accuracy sensors can be produced for the most exacting requirements. new machinery or processes may require a new design of temperature sensor and labfacility can undertake such requirements. advice is freely available on the best choice of sensor type, probe material, termination method and installation technique to best suit the process. probe certification labfacility can supply probes and instruments complete with a ukas certificate of calibration to order. some stock resistance thermometer probes with a ukas certificate are available for immediate delivery. custom calibration to specific customer requirements caters for routine, specified re-calibration for quality control procedures. calibration points can be specified between -20 c and +1100 c according to probe and instrumentation specifications. the certificate issued for each sensor will state any calibration error which is measured at the various test values and also the uncertainties which exist in the calibration measurement system. thermal temperature calibration essentially the test probe reading is compared with that of a certified reference probe whilst both are held at a common, stable temperature. alternatively, if a fixed point cell is used, there is no comparison with a certified thermometer; fixed point cells provide a highly accurate, known reference temperature, that of their phase conversion. sensor capabilities and markets include: vehicle ice-warning steriliser measurement of rotor-blade temperature outside aircraft temperature measurement medical and cryogenic applications aircraft brake-disc temperature testing formula 1 racing engine testing and tyre warming manifold automotive engine testing vending machines surface temperature measurement laboratory test equipment food processing machinery wind tunnel testing tobacco machinery heating and ventilation plastics machinery textile industry oil industry special autoclave probe
compression glands male coupling compression glands for positioning temperature probes brass & stainless steel versions 1 8 , 1 4 , 1 2 bspp & bspt suitable for probe diameters 1.0, 1.5, 3.0, 4.5 & 6.0mm metric threads also available from stock imperial probe sizes available upon request flange plate stainless steel or brass for mounting temperature sensor through a vessel wall suitable for probe diameter 1.5, 3.0,4.5 & 6mm 1 8 bspp female thread to accept compression gland 3 x 4mm diameter holes on 40mm pcd thermopockets solid drilled & fabricated versions stainless steel 303 & 316 food grade protect probes from corrosive media facilitate probe replacement without process disturbance 1 2 bspp process thread, 1 8 bspp sensor connection to suit 3 & 6mm diameter probes outside diameter 12mm high pressure version for 1000 & 5000 psi (solid drilled) bayonet fittings & adaptors for quick fit & coupling of temperature probes designed for installing fixed mount style temperature probes adaptors = 303 st/st bayonet fittings = bnp compression gland or grub screw fitting adaptors with 1 8 bsp thread alternative fittings available on request 13 www.labfacility.co.uk installation fittings for temperature sensors order codes stainless steel bspp bore mm code 1 8 1.5 fc-132 1 8 3.0 fc-140 1 8 6.0 fc-138 1 4 3.0 fc-159 1 4 6.0 fc-168 1 2 6.0 fc-201 bspt 1 8 1.0 fc-130 1 8 1.5 fc-131 1 8 3.0 fc-133 1 8 4.5 xs-253-rs 1 8 6.0 fc-136 1 4 3.0 fc-158 1 4 6.0 fc-167 1 2 4.5 xs-256-rs 1 2 6.0 fc-200 brass bspp bore mm code 1 8 3.0 fc-003 1 4 3.0 fc-031 1 4 6.0 fc-036 bspt 1 8 1.5 fc-001 1 8 3.0 fc-002 1 8 6.0 fc-011 1 4 3.0 fc-030 1 4 6.0 fc-037 1 2 6.0 fc-092 order codes high pressure version 303 grade stainless steel (1000 psi) to suit probe size/length code up to 6.35mm x 200mm lb-005 high pressure version 316 grade stainless steel (tapered) (5000 psi) to suit probe size/length code 6mm x 100mm lb-003 6mm x 150mm lb-001-rs standard fabricated versions 316 stainless steel outer diameter 8mm to suit probe size/length code 3mm x 150mm tpf-8.0-100 3mm x 200mm tpf-8.0-150 outer diameter 7/16 dia code to suit probe size/length 6mm x 150mm tpf-11.1-100 6mm x 200mm tpf-11.1-150 6mm x 400mm tpf-11.1-350 6mm x 600mm tpf-11.1-550 order codes stainless steel ca-250 brass ca-251 order codes bayonet fittings single pin / single slot code 3.0mm grub screw ca-302 4.5mm grub screw ca-303 3.0mm compression ca-300 4.5mm compression ca-301 bayonet adaptors 22mm long ca-400 35mm long ca-401 48mm long ca-402 64mm long ca-403 dm600 battery powered in-head field indicator temperature readout in-head battery powered (3 year battery life) rtd or tc input options push button configurable 4 digit display ip67 housing details on request dm700 loop powered in-head field indicator temperature readout in-head 4-20ma loop powered rtd or tc input options push button configurable 4 digit display ip67 housing details on request alternatives made to order details on request in-head indicators
tx104 temperature transmitter proven, reliable design two wire 4-20ma low cost terminal head mounting, din form for kne, b&n heads thermocouple input j,k and t pt100 input, 2 or 3 wire user re-scaleable special ranges to order emc compliant supply 10 to 30v dc high accuracy specifications output 4-20ma loop powered, max, 30ma loop supply 10 to 30v dc reverse connection protected loop resistance 700 ? @ 24v ambient temperature 0 to 70 c operating dimensions 42mm dia x 23mm. holes 5.5mm x 33mm centres tx104p pt100 input accuracy 0.2 c plus +0.2% rdg range adjustment 25 c to 500 c tx104 k,t or j thermocouple input accuracy 0.1%fs plus cold junction errors offset adjustment 100 c, solder link & potentiometer span adjustment 100 to 1000 c cold junction automatic 0 to 70 c rescaleable type k between 0 and 1000 c type j between 0 and 400 c type t between 0 and 400 c note: thermocouple must have insulated measuring junction tx203 digital prt temperature transmitter low cost, high accuracy two wire, 4-20ma pt100 input, 2 or 3 wire, -200 c to 850 c terminal head mounting, din form for kne, b & n heads emc compliant supply 10 to 30v dc one shot digital programming, without pots sensor fail led specifications input pt100, 2/3 wire, iec751, 100 ? @ 0 c range -200 c to 850 c accuracy 0.1 c 0.1% of reading output 4-20ma, loop powered loop supply 10-35v dc, reverse connection protected loop resistance 700 ? @24v ambient temperature -40 c to 85 c dimensions 43mm dia x 21.2 holes 5.5mm dia x 33mm center tx205 smart temperature transmitter low cost, entry level smart transmitter galvanic isolation high accuracy pt100 input 2 or 3 wire, -200 to 850 c scaleable programming via rs232 interface two wire, 4-20ma thermocouple input j,k,t,r,s,e & n - 200 to 1760 c full range, scaleable terminal head mounting emc compliant supply 10-30v dc is version to eexiaiic t4 t6 available specifications output 4-20ma loop powered loop supply 10-30v dc, reverse connection protected loop resistance 700 ? @24v ambient temperature -40 c to 85 c dimensions 43mm dia x 21. holes 5.5mm dia x 33 centre pt100 input: accuracy 0.1 c 0.05% of reading thermocouple input: types j,k,t,r,s,e,n accuracy o.04% full range 0.4% of reading cold junction automatic, 0 to 70 c note: thermocouple must have insulated measuring junction tx210 smart isolated temperature transmitter low cost, entry level smart transmitter with galvanic isolation high accuracy pt100 input 2 or 3 wire, -200 to 850 c scaleable programming via rs232 interface two wire, 4-20ma thermocouple input j,k,t,r,s,e & n - 200 to 1760 c full range, scaleable terminal head mounting, din form emc compliant supply 10-30v dc is version to eexiaiic t4 t6 available specifications output 4-20ma loop powered loop supply 10-30v dc, reverse connection protected loop resistance 700 ? @24v ambient temperature -40 c to 85 c dimensions 43mm dia x 21. holes 5.5mm dia x 33 centre pt100 input: accuracy 0.1 c 0.05% of reading thermocouple input: types j,k,t,r,s,e,n accuracy o.04% full range 0.4% of reading cold junction automatic, 0 to 70 c 14 www.labfacility.co.uk head mounting temperature transmitters & indicators order codes prt version tx205p thermocouple version tx205t prt version is tx205px thermocouple version is tx205tx alternatives made to order details on request order code type j tx104j type k tx104k type t tx104t pt100 tx104rt order code tx203 order codes prt version tx210p thermocouple version tx210t prt version is tx210px thermocouple version is tx210tx
europe s largest range of temperature sensors industrial & laboratory thermocouple & prt probes in configurations to suit any application, ranges from -200 c to 1700 c custom design versions available transmitter-in-head options pt100 elements probe fittings & accessories all in this brochure the best in thermocouple connectors full range of thermocouple connectors high quality plugs and sockets in iec 60584, ansi, jis, and other colours comprehensive range of fittings and accessories including mounting panels wide range of high quality thermocouple & prt cables extension and compensating cables a wide range of insulation types and configurations in iec 60584 and bs 1843 colours including pfa, ptfe, pvc and fibreglass market leading temperature & process instrumentation precision digital thermometers multi function digital thermometers calibrators multi-way switches transmitters controllers & indicators loggers and scanners digital test meters equipment & component parts for sensor manufacturers compact thermocouple welder and microwelder mi cables, stainless steel sheaths, pots and fittings terminal heads & blocks versatile dry block calibrators accurate, stable portable calibrators for -10 c to 1200 c to suit industrial & scientific temperature sensors ukas traceable calibrations certified probe calibrations between -10 c and 1200 c and our indispensable temperature handbook extensive pdf downloads available from website 15 www.labfacility.co.uk product focus ? labfacility range at a glance
labfacility leaders in temperature measurement labfacility market leading products represent more than thirty years of design and applications experience in industrial and laboratory, temperature and process measurement. labfacility products and services are specified by leading uk and european distributors and manufacturers and are also exported to more than 85 countries. quality and service are key elements in the continued growth of labfacility; technical support is always freely available from our experienced technical sales teams and the company has iso9001 accreditation. not only do we manufacture temperature sensors and fittings, thermocouple connectors, precision electronic thermometers and thermocouple welders, we also supply thermocouple cables, temperature transmitters, hand held digital thermometers and test instruments, dry block calibrators, loggers, scanners and temperature controllers. labfacility manufacturer and stockist applications and industries include: autoclaves aerospace automotive & motorsport education energy food heat treatment medical metallurgy meteorology metrology, in particular, r&d, temperature calibration, laboratory and quality control departments. plastics & rubber power generation. extensive pdf downloads available from website southern uk & export division : units 5,6 & 7, block k, southern cross industrial estate, shripney road, bognor regis, west sussex po22 9sd export sales: tel: +44(0)1243 871287 fax: +44(0)1243 871281 email: exportsales@labfacility.co.uk southern uk sales: tel: +44(0)1243 871280 fax: +44(0)1243 871281 email: southernsales@labfacility.co.uk northern uk division : unit 3b outgang lane, dinnington, sheffield s25 3qy northern uk sales: tel: +44(0)1909 569446 fax: +44(0)1909 550632 email: northernsales@labfacility.co.uk to receive our regular email newsletter, please register your details on our website www.labfacility.co.uk

▲Up To Search▲

Price & Availability of DM-301

	To Download DM-301 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .